Overview

This website is operated by Aircraft Engine Component Services Singapore. Throughout the site, the terms “we”, “us” and “our” refer to Aircraft Engine Component Services Singapore. Aircraft Engine Component Services Singapore offers this website, including all information, tools and services available from this site to you, the user, conditioned upon your acceptance of all terms, conditions, policies and notices stated here.

By visiting our site and/ or purchasing something from us, you engage in our “Service” and agree to be bound by the following terms and conditions (“Terms of Service”, “Terms”), including those additional terms and conditions and policies referenced herein and/or available by hyperlink. These Terms of Service apply to all users of the site, including but not limited to users who are browsers, vendors, customers, merchants, and/ or contributors of content. Please read these Terms of Service carefully before accessing or using our website. By accessing or using any part of the site, you agree to be bound by these Terms of Service. If you do not agree to all the terms and conditions of this agreement, then you may not access the website or use any services. If these Terms of Service are considered an offer, acceptance is expressly limited to these Terms of Service.

Any new features or tools which are added to the current store shall also be subject to the Terms of Service. You can review the most current version of the Terms of Service at any time on this page. We reserve the right to update, change or replace any part of these Terms of Service by posting updates and/or changes to our website. It is your responsibility to check this page periodically for changes. Your continued use of or access to the website following the posting of any changes constitutes acceptance of those changes. Our store is hosted on Woocommerce. They provide us with the online e-commerce platform that allows us to sell our products and services to you. All products and services are limited to delivert in Singapore and denominate in Singapore Dollar (SGD) only.

SECTION 1 – ONLINE STORE TERM

By agreeing to these Terms of Service, you represent that you are at least the age of majority in your state or province of residence and you have given us your consent to allow any of your minor dependents to use this site.

You may not use our products for any illegal or unauthorized purpose nor may you, in the use of the Service, violate any laws in your jurisdiction (including but not limited to copyright laws).

You must not transmit any worms or viruses or any code of a destructive nature.

A breach or violation of any of the Terms will result in an immediate termination of your Services.

SECTION 2 – GERNERAL CONDITIONS

We reserve the right to refuse service to anyone for any reason at any time.

You understand that your content (not including credit card information), may be transferred unencrypted and involve:

(a) transmissions over various networks; and

(b) changes to conform and adapt to technical requirements of connecting networks or devices. Credit card information is always encrypted during transfer over networks.

You agree not to reproduce, duplicate, copy, sell, resell or exploit any portion of the Service, use of the Service, or access to the Service or any contact on the website through which the service is provided, without express written permission by us.

The headings used in this agreement are included for convenience only and will not limit or otherwise affect these Terms.

SECTION 3 – ACCURACY, COMPLETENESS AND TIMELINESS OF INFORMATION

We are not responsible if information made available on this site is not accurate, complete or current. The material on this site is provided for general information only and should not be relied upon or used as the sole basis for making decisions without consulting primary, more accurate, more complete or more timely sources of information. Any reliance on the material on this site is at your own risk.

This site may contain certain historical information. Historical information, necessarily, is not current and is provided for your reference only. We reserve the right to modify the contents of this site at any time, but we have no obligation to update any information on our site. You agree that it is your responsibility to monitor changes to our site.

SECTION 4 – MODIFICATIONS TO THE SERVICE AND PRICES

Prices for our products are subject to change without notice.

We reserve the right at any time to modify or discontinue the Service (or any part or content thereof) without notice at any time.

We shall not be liable to you or to any third-party for any modification, price change, suspension or discontinuance of the Service.

SECTION 5 – PRODUCTS OR SERVICES (If Applicable)

Certain products or services may be available exclusively online through the website. These products or services may have limited quantities and are subject to return or exchange. We have made every effort to display as accurately as possible the colors and images of our products that appear at the store. We cannot guarantee that your computer monitor’s display of any color will be accurate. We reserve the right, but are not obligated, to limit the sales of our products or Services to any person, geographic region or jurisdiction. We may exercise this right on a case-by-case basis. We reserve the right to limit the quantities of any products or services that we offer. All descriptions of products or product pricing are subject to change at anytime without notice, at the sole discretion of us. We reserve the right to discontinue any product at any time. Any offer for any product or service made on this site is void where prohibited. We do not warrant that the quality of any products, services, information, or other material purchased or obtained by you will meet your expectations.

SECTION 6 – ACCURACY OF BILLING AND ACCOUNT INFORMATION

We reserve the right to refuse any order you place with us. We may, in our sole discretion, limit or cancel quantities purchased per person, per household or per order. These restrictions may include orders placed by or under the same customer account, the same credit card, and/or orders that use the same billing and/or shipping address. In the event that we make a change to or cancel an order, we may attempt to notify you by contacting the e-mail and/or billing address/phone number provided at the time the order was made. We reserve the right to limit or prohibit orders that, in our sole judgment, appear to be placed by dealers, resellers or distributors. You agree to provide current, complete and accurate purchase and account information for all purchases made at our store. You agree to promptly update your account and other information, including your email address and credit card numbers and expiration dates, so that we can complete your transactions and contact you as needed.

SECTION 7 – THIRD-PARTY LINKS

Certain content, products and services available via our Service may include materials from third-parties.

Third-party links on this site may direct you to third-party websites that are not affiliated with us. We are not responsible for examining or evaluating the content or accuracy and we do not warrant and will not have any liability or responsibility for any third-party materials or websites, or for any other materials, products, or services of third-parties.

We are not liable for any harm or damages related to the purchase or use of goods, services, resources, content, or any other transactions made in connection with any third-party websites. Please review carefully the third-party’s policies and practices and make sure you understand them before you engage in any transaction. Complaints, claims, concerns, or questions regarding third-party products should be directed to the third-party.

SECTION 8 – USER COMMENTS, FEEDBACK AND OTHER SUBMISSIONS

If, at our request, you send certain specific submissions (for example contest entries) or without a request from us you send creative ideas, suggestions, proposals, plans, or other materials, whether online, by email, by postal mail, or otherwise use in any medium any comments that you forward to us. We are and shall be under no obligation (1) to maintain any comments; or (3) to respond to any comments. We may, without any obligations to, monitor, edit or remove content that we determine in our sole discretion are unlawful, offensive, threatening, libelous, defamatory, pornographic, obscene or otherwise objectionable or violates any party’s intellectual property or these Terms of Service. You agree that your comments will not violate any right of any third-party, including copyright, trademark, privacy, personality or other personal or proprietary right. You further agree that your comments will not contain libelous or otherwise unlawful, abusive or obscene material, or contain any computer virus or other malware that could in any way affect the operation of the Service or any related website. You may not use a false e-mail address, pretend to be someone other than yourself, or otherwise mislead us or third parties as to the origin of any comments. You are solely responsible for any comments you make and their accuracy. We take no responsibility and assume no liability for any comments posted by you or any third-party.

SECTION 9 – PERSONAL INFORMATION

Your submission of personal information through the store is governed by our Privacy Policy. To view our Privacy Policy.

SECTION 10 – ERRORS, INACCURACIES AND OMISSIONS

Occasionally there may be information on our site or in the Service that contains typographical errors, inaccuracies or omissions that may relate to product descriptions, pricing, promotions, offers, product shipping charges, transit times and availability. We reserve the right to correct any errors, inaccuracies or omissions, and to change or update information or cancel orders if any information in the Service or on any related website is inaccurate at any time without prior notice (including after you have submitted your order).

We undertake no obligation to update, amend or clarify information in the Service or on any related website, including but not limited to, pricing information, except as required by law. No specified update or refresh date applied in the Service or on any related website, should be taken to indicate that all information in the Service or on any related website has been modified or updated.

SECTION 11 – PROHIBITED USES

In addition to other prohibitions as set forth in the Terms of Service, you are prohibited from using the site or its content:

(a)for any unlawful purpose;

(b) to solicit others to perform or participate in any unlawful acts;

(c) to violate any international, federal, provincial or state regulations, rules, laws, or local ordinances;

(d) to infringe upon or violate our intellectual property rights or the intellectual property rights of others;

(e) to harass, abuse, insult, harm, defame, slander, disparage, intimidate, or discriminate based on gender, sexual orientation, religion, ethnicity, race, age, national origin, or disability;

(f) to submit false or misleading information;

(g) to upload or transmit viruses or any other type of malicious code that will or may be used in any way that will affect the functionality or operation of the Service or of any related website, other websites, or the Internet;

(h) to collect or track the personal information of others;

(i) to spam, phish, pharm, pretext, spider, crawl, or scrape;

(j) for any obscene or immoral purpose; or

(k) to interfere with or circumvent the security features of the Service or any related website, other websites, or the Internet. We reserve the right to terminate your use of the Service or any related website for violating any of the prohibited uses.

SECTION 12 – DISCLAIMER OF WARRANTIES; LIMITATION OF LIABILITY

We do not guarantee, represent or warrant that your use of our service will be uninterrupted, timely, secure or error-free.

We do not warrant that the results that may be obtained from the use of the service will be accurate or reliable.

You agree that from time to time we may remove the service for indefinite periods of time or cancel the service at any time, without notice to you. You expressly agree that your use of, or inability to use, the service is at your sole risk. The service and all products and services delivered to you through the service are (except as expressly stated by us) provided ‘as is’ and ‘as available’ for your use, without any representation, warranties or conditions of any kind, either express or implied, including all implied warranties or conditions of merchantability, merchantable quality, fitness for a particular purpose, durability, title, and non-infringement. In no case shall Aircraft Engine Component Services Singapore, our directors, officers, employees, affiliates, agents, contractors, interns, suppliers, service providers or licensors be liable for any injury, loss, claim, or any direct, indirect, incidental, punitive, special, or consequential damages of any kind, including but not limited to lost profits, lost revenue, lost savings, loss of data, replacement costs, or any similar damages, whether based in contract, tort (including negligence), strict liability or otherwise, arising from your use of any of the service or any products procured using the service, or for any other claim related in any way to your use of the service or any product, including, but not limited to, any errors or omissions in any content, or any loss or damage of any kind incurred as a result of the use of the service or any content (or product) posted, transmitted, or otherwise made available via the service, even if advised of their possibility. Because some states or jurisdictions do not allow the exclusion or the limitation of liability for consequential or incidental damages, in such states or jurisdictions, our liability shall be limited to the maximum extent permitted by the laws of Singapore.

SECTION 13 – INDEMNIFICATION

You agree to indemnify, defend and hold harmless Aircraft Engine Component Services Singapore and our parent, subsidiaries, affiliates, partners, officers, directors, agents, contractors, licensors, service providers, subcontractors, suppliers, interns and employees, harmless from any claim or demand, including reasonable attorneys’ fees, made by any third-party due to or arising out of your breach of these Terms of Service or the documents they incorporate by reference, or your violation of any law or the rights of a third-party.

SECTION 14 – SEVERABILITY

In the event that any provision of these Terms of Service is determined to be unlawful, void or unenforceable, such provision shall nonetheless be enforceable to the fullest extent permitted by applicable law, and the unenforceable portion shall be deemed to be severed from these Terms of Service, such determination shall not affect the validity and enforceability of any other remaining provisions.

SECTION 15 – TERMINATION

The obligations and liabilities of the parties incurred prior to the termination date shall survive the termination of this agreement for all purposes.

These Terms of Service are effective unless and until terminated by either you or us. You may terminate these Terms of Service at any time by notifying us that you no longer wish to use our Services, or when you cease using our site.If in our sole judgment you fail, or we suspect that you have failed, to comply with any term or provision of these Terms of Service, we also may terminate this agreement at any time without notice and you will remain liable for all amounts due up to and including the date of termination; and/or accordingly may deny you access to our Services (or any part thereof).

SECTION 16 – ENTIRE AGREEMENT

The failure of us to exercise or enforce any right or provision of these Terms of Service shall not constitute a waiver of such right or provision.

These Terms of Service and any policies or operating rules posted by us on this site or in respect to The Service constitutes the entire agreement and understanding between you and us and govern your use of the Service, superseding any prior or contemporaneous agreements, communications and proposals, whether oral or written, between you and us (including, but not limited to, any prior versions of the Terms of Service).Any ambiguities in the interpretation of these Terms of Service shall not be construed against the drafting party.

SECTION 17 – GOVERNING LAW

These Terms of Service and any separate agreements whereby we provide you Services shall be governed by and construed in accordance with the laws of Singapore.

SECTION 18 – CHANGES TO TERMS OF SERVICE

You can review the most current version of the Terms of Service at any time at this page.

We reserve the right, at our sole discretion, to update, change or replace any part of these Terms of Service by posting updates and changes to our website. It is your responsibility to check our website periodically for changes. Your continued use of or access to our website or the Service following the posting of any changes to these Terms of Service constitutes acceptance of those changes. These Terms of Service and any separate agreements whereby we provide you Services shall be governed by and construed in accordance with the laws of Singapore.

SECTION 19 – CONTACT INFORMATION

Questions about the Terms of Service should be sent to us at inquiry@aecssingapore.com

Other supporting equipment

We also fabricate and supply other supporting equipment such as downdraft table, electrical lifter, wet & dry vacuum system, etc.

Powder Transfer Station & Storage Hoppers

AECSS offers advanced solutions in powder handling for additive manufacturing. Our specialized Powder Transfer Stations and Storage Hoppers are designed to optimize the handling, storage, and transfer of powders in your additive manufacturing processes.

  1. Powder Transfer Stations: Our Transfer Stations provide a controlled environment for seamless powder transfer between containers or systems. Engineered for safety and precision, these stations ensure minimal powder exposure and efficient handling during the transfer process.
  2. Storage Hoppers: Explore our range of Storage Hoppers tailored to accommodate various powder types and volumes. These hoppers are designed for secure and organized powder storage, optimizing space utilization and ensuring easy access for production needs.

 

At AECSS, we recognize the critical role of proper powder handling in additive manufacturing. Our Transfer Stations and Storage Hoppers are meticulously designed to streamline your operations, ensuring precision, safety, and efficiency in powder management.

Key Features

  • 2 axes fully programmable rotation table. No manual lifting of the printed part.
  • Fully closed inert environment if needed.
  • Fully programmable and auto rotation function.
  • Purge system with auto cleaning features
  • Ultrasonic vibration features to enable the free powder flow
  • Zero or minimum loss of powder during operation.
  • Fully integrated with the powder reclaiming systems

Polymer Powder Reclaiming System

Introducing our cutting-edge Polymer Powder Reclaiming System, designed to revolutionize your additive manufacturing process. This innovative system offers unmatched efficiency, compactness, and automation to streamline your production while ensuring top-quality results!
  • Compact in size with features includes
    • Powder removal
    • Sieving
    • Auto filling of virgin powder based on ratio set
    • Blending station
  • Reclaim and reuse your polymer powders effortlessly, reducing material waste and cost.
  • Our system’s compact footprint saves valuable floor space in your manufacturing facility.
  • Enjoy the convenience of an all-in-one solution that combines sieving, dispensing, and mixing in a single unit.
  • Say goodbye to manual labor with our fully automated system, increasing your operational efficiency.
  • Ensure the purity of your reclaimed powder with an inbuilt sieving station, eliminating impurities and irregularities.
  • Customizable to any size based on the request

 

This innovative system offers unmatched efficiency, compactness, and automation to streamline your production while ensuring top-quality results!

Key Features

  • 2 axes fully programmable rotation table. No manual lifting of the printed part.
  • Fully closed inert environment if needed.
  • Fully programmable and auto rotation function.
  • Purge system with auto cleaning features
  • Ultrasonic vibration features to enable the free powder flow
  • Zero or minimum loss of powder during operation.
  • Fully integrated with the powder reclaiming systems

Metal Powder Reclaiming System

Revolutionize your metal additive manufacturing process with our state-of-the-art Metal Powder Reclaiming System. Our innovative solution is engineered to fully automate every aspect of powder handling, from removal to transfer, sieving, mixing, and seamless loading into 3D printers. Here’s what makes our system stand out:

  • Achieve consistent, high-quality prints with our precise powder handling and mixing capabilities.
  • Experience minimal downtime thanks to automated loading into 3D printers, ensuring a continuous and uninterrupted manufacturing process.
  • Say goodbye to time-consuming manual powder handling. Our automated system optimizes your workflow, saving you valuable production hours.
  • Maximize powder utilization by seamlessly blending virgin and used powder, reducing waste and material costs.
  • Enjoy the convenience of a closed-loop system that minimizes contamination risks, ensuring the purity of your metal powders.

Key Features:

  • Our system seamlessly integrates into your existing additive manufacturing setup and 3D printers of any brand, reducing the need for complex modifications.
  • Tailor the system to your specific needs with adjustable settings for powder blending, sieving, and transfer rates.
  • Benefit from user-friendly controls that allow you to fine-tune your process with ease.
  • Comes with IOT system for remote monitoring and control

Sieving Machine

At AECSS, we recognize the importance of sustainability and resource optimization in additive manufacturing. Our Sieving Machines offer an essential solution to refine and reclaim used powders, ensuring their quality and reusability for future production cycles.
    • Efficient Reclamation:

Our machines ensure efficient and thorough sieving, reclaiming valuable powders for reuse in additive manufacturing processes.

    • Cost-Effective Solutions:

Optimize resources and reduce material waste by reclaiming powders, contributing to a more sustainable and cost-efficient production cycle.

    • Adaptability and Precision:

Customizable options allow for adaptable sieving processes, ensuring precise particle separation for optimal powder reuse.

Key Features

  • Fully inert environment.
  • Customized for all brand of AM machines and models.
  • Blend used and virgin powder for continuous supply of powder for AM process.
  • Faster sieving process with high flow rate.
  • Auto transfer of the sieved powder to the SLM machine
  • Closed system and no contamination of the powder
  • Auto overflow bin collector with weighing scale

Key Features

  • 2 axes fully programmable rotation table. No manual lifting of the printed part.
  • Fully closed inert environment if needed.
  • Fully programmable and auto rotation function.
  • Purge system with auto cleaning features
  • Ultrasonic vibration features to enable the free powder flow
  • Zero or minimum loss of powder during operation.
  • Fully integrated with the powder reclaiming systems

Depowdering Machine

At AECSS, we understand the importance of precise and efficient post-processing in additive manufacturing. Our Depowdering Machines are engineered to elevate your part finishing processes, ensuring immaculate cleaning and superior quality results.
  • Superior Quality
  • Our machines are built with a focus on quality and reliability, ensuring consistent and effective depowdering results.

  • Enhanced Productivity
  • Streamline your post-printing workflow, saving time and resources with our efficient depowdering solutions.

  • Customized Solutions
  • We offer adaptable and customizable machines to suit specific part geometries and production needs, ensuring flexibility in operations.

Key Features

  • 2 axes fully programmable rotation table. No manual lifting of the printed part.
  • Fully closed inert environment if needed.
  • Fully programmable and auto rotation function.
  • Purge system with auto cleaning features
  • Ultrasonic vibration features to enable the free powder flow
  • Zero or minimum loss of powder during operation.
  • Fully integrated with the powder reclaiming systems

Key Features

  • 2 axes fully programmable rotation table. No manual lifting of the printed part.
  • Fully closed inert environment if needed.
  • Fully programmable and auto rotation function.
  • Purge system with auto cleaning features
  • Ultrasonic vibration features to enable the free powder flow
  • Zero or minimum loss of powder during operation.
  • Fully integrated with the powder reclaiming systems